MK-01; -NKOP (DN50-150)
MK-01; -NKOP (DN50-150)
Well water meters
- Wide measuring range
- Low starting rate
- Removable measuring panel
- Double-sided rotor bearing
- Preequipped for installation of radio module for communication in the Wireless M-Bus and impulse module (not applicable to versions with NK, NO, NKO and NKOP transmitters)
Application
Measurement range
Features
Technical data
Downloads
WFor measuring the consumption of greater amounts of cold water with a temperature up to 30°C on the maximum working pressure up to 16 bar (PN16). For installation at water intakes (drilled wells). Installation of water meter in the area where a vertical pipeline turns to horizontal pipeline, with the counter directed upwards. MK water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
- Cold water R63
- Possibility of replacing a knee between the vertical and horizontal pipelines
- Materials approved for contact with potable water
- Possibility of electronic check-up
- Wide measurement range and low starting flow rate
- Removable measuring insert
- Easy read-out due to an adjustable rotary counter
- Counter of roller-pointer type housed in airtight casing with all gear wheels in dry space,
- Magnetic clutch
- Possibility of remote counting of water capacity and flow rate (data according to a separate card)
- Counter casing with a cover for request
- Conformity with the standards PN-ISO 4064, BS 5728
| Type | R | Q3 [m3/h] | DN [mm] | Length** [mm] | Connection |
|---|---|---|---|---|---|
| MK 50-01 | R63 | 25 | 50 | 150 | flange* |
| MK 50-01-NKOP | R63 | 25 | 50 | 150 | flange* |
| MK 80-01 | R63 | 63 | 80 | 180 | flange* |
| MK 80-01-NKOP | R63 | 63 | 80 | 180 | flange* |
| MK 100-01 | R63 | 100 | 100 | 200 | flange* |
| MK 1000-01-NKOP | R63 | 100 | 100 | 200 | flange* |
| MK 150-01 | R63 | 250 | 150 | 250 | flange* |
| MK 150-01-NKOP | R63 | 250 | 150 | 250 | flange* |
* Flange drilling: according to PN-EN 1092-2 (PN10), DIN 2532, DIN2501 (NP10), BS4504 (NP10)
** Size measured from the vertical inlet axis to external surface of outlet flange
Manual
Certificates
You may also be interested in
